High performance, easy installation and low cost.
The controller has a built-in touchscreen interface, fullcolor display and ten-key input panel. A power supply for control of the external lighting (12VDC, 24W total) is also integrated into the controller. Simply connect the cameras and lights to the controller.
There is no need for a consoles, external monitor or a separate power supply for lighting.
Verification between printing and bar code or 2D bar code
16 inspection windows are available for each camera (Pattern matching camera and Measurement camera)
Each camera can have a maximum of 16 inspection windows in one Bank of memory. Each inspection window can be set to inspect a different feature based on 6 inspection functions.
The inspection judgment output for each inspection window can be output through the 50 pin I/O connector.
Up to 4 inspection windows are available for OCR camera
The parameters for each inspection window can be individually set.
Up to 2 forms of each Date and Time are available for one window and up to 4 forms of strings are available (max. total of 4 forms).
Banks are available for one camera
You can remotely select the bank to use by using a controller, PLC or the RS-232C I/F.
The setup parameters for each bank are stored in memory and can be recalled when the product is run again.
Detecting shape and color of the object by color pattern matching camera unit
Detecting shape and color of the object is available by color pattern matching camera.
Positioning of PCB by measurement camera unit
Positioning of PCB is available by measurement camera unit.
Checking printing quality by OCR camera unit
Checking printing quality is available by OCR camera unit.